Here are the directions on how to assemble and disassemble your SkinnyFit glass bottle. We also included a diagram below!
Disassemble glass bottle:
- Twist off the top cap and bottom base of the outer shell.
- With base and cap removed, place the bottle upside down on a hard, flat surface.
- Firmly grasp the outside of the bottle with two hands, and slide protective plastic shell downward.
- While holding outer plastic shell, pull inner glass insert through the top of the shell to separate into two pieces.
Reassemble glass bottle:
- Push glass insert firmly into protective shell unit until bottom of glass is flush with bottom of shell.
- Screw base tightly onto bottom of protective shell to ensure glass insert is firmly in place.
- Screw cap on tightly to ensure proper seal with bottle.
*Please note there are 3 silicone rings: one in the cap, one in the base, and one on the neck of the glass insert.*